1

DT-47811-S1 Transmission Lift Plate

For equivalent regional tools, refer to Special Tools.

Warning: Handle with care, the transmission assembly weighs over 83 Kg (183 lbs). Bodily injury could occur if not handled properly.

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Tighten bolts and nut.

Tighten
12 N·m (106 lb in)

Tip
After installation of lift plate, raise the transmission with an overhead hoist.

2

DT-46625 Transmission Holding Fixture

DT-46625-10 Holding Fixture Adapter

For equivalent regional tools, refer to Special Tools.

Tip
Adjust mounting block on fixture to match bosses on case, then tighten bolts to 13 N·m (10 lb ft).