Removal Procedure
Caution: Refer to Fuel Pressure Notice in the Preface section.
- Relieve the fuel system pressure. Refer to
Fuel Pressure Relief
.
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the fuel filter protector located on the underbody.
- Disconnect the rear fuel feeding tube connector and the rear filter tube connector.
Installation Procedure
- Connect the rear fuel feeding tube connector and the rear fuel filter tube connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the fuel filter protector.
Tighten
Tighten the fuel filer protector retaining bolt
to 4 N·m (35 lb in).
- Connect the negative battery cable.
- Perform a leak test of the fuel filter.