GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Replacement

Removal Procedure

    Object Number: 1255667 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the rear stabilizer link. Refer to Stabilizer Shaft Link Replacement .
  3. Remove the rear stabilizer bar bolt, U-clamp, and bushing.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1255668 Size: SH
  1. Install the rear stabilizer bar bolt, U-clamp, and bushing.

    2. Tighten
    Tighten the rear stabilizer bar bolt to 50 N·m (37 lb ft).

  2. Install the rear stabilizer link. Refer to Stabilizer Shaft Link Replacement .