GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Body 🢒 Bumpers 🢒 Front Bumper Impact Bar Replacement

Removal Procedure

    Object Number: 1256795 Size: SH
  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Remove the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement .
  3. Disconnect the electrical connector.
  4. Remove the bolts and the front bumper impact bar.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256795 Size: SH
  1. Install the front impact bar with the bolts.

    2. Tighten
    Tighten the front impact bar bolts to 39 N·m (29 lb ft).

  2. Connect the electrical connector.
  3. Install the front bumper energy absorber. Refer to Front Bumper Fascia Energy Absorber Replacement .
  4. Install the front bumper fascia. Refer to Front Bumper Fascia Replacement .