Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Pry off the courtesy lamp lens by inserting a screwdriver into the recess
along the edge of the lens.
- Remove the screws and the courtesy lamp housing from the headliner.
- Disconnect the electrical connector.
- Remove the bulb.
Installation Procedure
- Install the replacement bulb.
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the interior courtesy lamp housing to the headliner with the screws.
Tighten
Tighten the interior courtesy lamp housing screw
to 2 N·m (18 lb in).
- Press the interior courtesy lamp lens onto the housing.
- Connect the negative battery cable.