GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Body 🢒 Lighting Systems 🢒 Ignition Lock Cylinder Lamp Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256526 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Interior Trim.
  3. Remove the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages, and Console.

    4. Object Number: 1256527 Size: SH
  4. Remove the steering column upper and lower covers.
  5. Remove the nuts and the bolts securing the steering column.
  6. Disconnect the steering column electrical connector.
  7. Lower the steering column.

    8. Object Number: 1256529 Size: SH
  8. Remove the screw and the headlamp, immobilizer demodulator.
  9. Remove the ignition switch keyhole lamp and the bulb.

Installation Procedure

    Object Number: 1256529 Size: SH
  1. Install the ignitions switch keyhole lamp and the bulb.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the headlamp, immobilizer demodulator, with the screw.

    3. Tighten
    Tighten the ignition switch keyhole lamp screw to 1.5 N·m (13 lb in).


    Object Number: 1256527 Size: SH
  3. Raise the steering column.
  4. Connect the steering column electrical connector.
  5. Install the nuts and the bolts securing the steering column.

    6. Tighten

        • Tighten the steering column nuts to 22 N·m (16 lb in).
        • Tighten the steering column bolts to 22 N·m (16 lb in).
  6. Install the steering column upper, lower cover.

    7. Object Number: 1256526 Size: SH
  7. Install the instrument cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement in Instrument Panel, Gages, and Console.
  8. Install the knee bolster. Refer to Knee Bolster Replacement in Interior Trim.
  9. Connect the negative battery cable.