GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Body 🢒 Wiring Systems 🢒 Power Steering Control Module Replacement

Removal Procedure
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the cargo area rear trim panel. Refer the Cargo Area Rear Trim Panel Replacement .

    3. Object Number: 1256456 Size: SH
  3. Remove the SSPS control module bolts.
  4. Slide the module up in order to remove the module.
  5. Disconnect the electrical connector from the module.

Installation Procedure

    Object Number: 1256456 Size: SH
  1. Connect the electrical connector to the SSPS control module.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256453 Size: SH
  2. Install the SSPS control module with bolts.

    3. Tighten
    Tighten the SSPS control module bolts to 9 N·m (80 lb in).

  3. Install the cargo area rear trim panel. Refer to Cargo Area Rear Trim Panel Replacement .
  4. Install the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .