GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Clutch Pedal Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1255788 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the return spring from the mount brace.

    3. Object Number: 1255789 Size: SH
  3. Remove the nut, the washer, and the pedal mounting shaft.

    4. Object Number: 1255790 Size: SH
  4. Remove the locking washer and the piston rod bolt.
  5. Remove the clutch pedal from the vehicle.

Installation Procedure

    Object Number: 1255790 Size: SH
  1. Install the clutch pedal to the mount brace. Make sure the return spring engages the notch on the rear of the clutch pedal.
  2. Coat the piston rod bolt with multi-purpose grease.
  3. Install the piston rod bolt and the locking washer.

    4. Object Number: 1255789 Size: SH
  4. Coat the pedal mounting shaft with multi-purpose grease.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the pedal mounting shaft, the washer, and the nut.

    6. Tighten
    Tighten the clutch pedal nut to 18 N·m (13 lb ft).


    Object Number: 1255788 Size: SH
  6. Connect the return spring to the mount brace.
  7. Connect the negative battery cable.