Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Place the steering wheel in the straight ahead position. Is the wheel in the correct position? | -- | Go to Step 2 | -- |
2 | Is the lower intermediate shaft pinch bolt lying parallel to the steering gear? | -- | Go to Step 3 | Go to Step 4 |
3 | Is the steering wheel off center by more than 5 degrees? | -- | Go to Step 5 | Go to Step 6 |
4 | The pinion is displaced on the rack. The steering pinion position must be corrected. Is the repair completed? | -- | Go to Step 2 | -- |
5 | Remove the steering wheel and center it on the spindle spliner. Is the repair complete? | -- | Go to Step 3 | -- |
6 |
Are the angles within specifications? | Inner angle: 37.5° Outer angle: 31° | System OK | Go to Step 7 |
7 | The rack assembly was not assembled correctly. Repair, as needed. Is the repair complete? | -- | Go to Step 6 | -- |
