GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Steering 🢒 Steering Wheel and Column 🢒 Turn Signal Multifunction Switch Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1255836 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the upper and the lower steering column cover panel screws.
  3. Remove the upper and the lower steering column cover panels.

    4. Object Number: 1255838 Size: SH
  4. Remove the turn signal switch by pushing in on the tabs on the top and the bottom of the switch housing.
  5. Disconnect the electrical connections from the turn signal switch.

Installation Procedure

    Object Number: 1255838 Size: SH
  1. Connect the electrical connections to the turn signal switch.
  2. Install the turn signal switch by snapping it into the switch housing.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1255836 Size: SH
  3. Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.

    4. Tighten
    Tighten the upper and the lower steering column cover panel screws to 2.5 N·m (22 lb in).

  4. Connect the negative battery cable.