GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Preface 🢒 Cautions and Notices 🢒 Rear Split Folding Seat Back Replacement

Removal Procedure

    Object Number: 1256659 Size: SH
  1. Lower the rear seat backs.
  2. Remove the retaining clips and reposition the rear seat back backside cover.
  3. Remove the nuts, the bolts, and the seat back from the hinges.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256659 Size: SH
  1. Install the seat back to the hinges with the bolts and the nuts.

    2. Tighten

    • Tighten the rear seat back bolts to 25 N·m (18 lb ft).
    • Tighten the rear seat back nuts to 25 N·m (18 lb ft).
  2. Install the rear seat back backside cover with the retaining clips.
  3. Raise and secure the rear seat back in the upright position.