GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Preface 🢒 Cautions and Notices 🢒 Inflatable Restraint Side Impact Sensor Replacement

Removal Procedure

    Caution: Refer to Sensing and Diagnostic Module Handling Caution in the Preface section.

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256498 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the trim from the upper center pillar.
  3. Remove the side air bag sensor mounting bolts.
  4. Remove the side air bag sensor.

Installation Procedure

    Object Number: 1256498 Size: SH
  1. Install the side air bag sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the side air bag sensor mounting bolts.

    3. Tighten
    Tighten the side air bag sensor mounting bolts to 10 N·m (89 lb in).

  3. Install the trim on the upper center pillar.
  4. Connect the negative battery cable.