GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Epica 🢒 Preface 🢒 Cautions and Notices 🢒 Wheelhouse Splash Shield Replacement

Removal Procedure

    Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.


    Object Number: 1256889 Size: SH
  1. Raise and suitably support the vehicle.
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the front mud guard. Refer to Rear Mud Flap Guard Replacement in Exterior Trim.
  4. Remove the screws and the front wheel well splash shield.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256889 Size: SH
  1. Install the screws and the front wheel well splash shield.

    2. Tighten
    Tighten the front wheel well splash shield screws to 2 N·m (18 lb in).

  2. Install the front mud guard. Refer to Rear Mud Flap Guard Replacement in Exterior Trim.
  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.