GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Exhaust Gas Recirculation Valve Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1375361 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the exhaust gas recirculation (EGR) valve wiring harness connector.
  3. Remove the EGR valve.
  4. Remove the EGR valve gasket.

Installation Procedure

    Caution: Refer to Safety Glasses Caution in the Preface section.


    Object Number: 1375363 Size: SH
  1. Clean the EGR valve adapter mating surfaces.
  2. Install a new EGR valve gasket.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the EGR valve.

    4. Tighten
    Tighten the EGR valve retaining bolts to 25 N·m (18 lb ft).

  4. Connect the EGR valve wiring harness connector.
  5. Connect the negative battery cable.