GM Service Manual Online
For 1990-2009 cars only

Engine Mount Replacement Right Side

Tools Required

J 28467-B , DW-117 (DW 110-060) Universal Engine Support Fixture

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

    Notice: Refer to Engine Mounting Notice in the Preface section.


    Object Number: 1375659  Size: SH
  1. Disconnect the negative battery cable.
  2. Notice: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or crankshaft balancer. Jacking against the oil pan may cause it to crack or break.

  3. Support the engine assembly using the J 28467-B .
  4. Remove the engine mount bracket-to-hydro mount nut and engine mount bracket nuts/bolt.
  5. Remove the engine mount bracket.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1375764  Size: SH
  1. Install the engine mount bracket and nuts.
  2. Tighten

        • Tighten the engine mount bracket-to-hydro mount nut to 63 N·m (46 lb ft).
        • Tighten the engine mount bracket bolt to 51 N·m (38 lb ft).
        • Tighten the 2 engine mount bracket nuts to 51 N·m (38 lb ft).
  3. Remove the J 28467-B .
  4. Connect the negative battery cable.

Engine Mount Replacement Left Side

Tools Required

J 28467-B , DW-117 (DW 110-060) Universal Engine Support Fixture

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

    Notice: Refer to Engine Mounting Notice in the Preface section.


    Object Number: 1375771  Size: SH
  1. Disconnect the negative battery cable.
  2. Notice: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or crankshaft balancer. Jacking against the oil pan may cause it to crack or break.

  3. Support the engine assembly using the J 28467-B .
  4. Remove the transaxle mount cage nut/bolts.
  5. Remove the mount.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1375774  Size: SH
  1. Install the engine mount (LH).
  2. Tighten

        • Tighten the 4 transaxle mount cage-to-longitudinal member bolts to 63 N·m (46 lb ft).
        • Tighten the transaxle mount cage-to-transaxle mount bracket bolt to 63 N·m (46 lb ft).
        • Tighten the transaxle mount cage-to-transaxle mount bracket nut to 63 N·m (46 lb ft).
        • Tighten the transaxle mount cage through bolt to 110 N·m (81 lb ft).
  3. Remove the J 28467-B .
  4. Connect the negative battery cable.