For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 Suspension 🢒 Rear Suspension 🢒 Trailing Arm Replacement

Trailing Arm Replacement for Chevrolet Epica 2007

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the rear wheels.
Remove the trailing link bolt-to-knuckle and the trailing link bracket bolts.
Remove the trailing link.

Notice: Refer to Fastener Notice in the Preface section.

Install the trailing link with bolt-to-knuckle and the bolts-to-trailing link bracket.

Tighten

•	Tighten the trailing link bolt-to-knuckle to 120 N·m (89 lb ft).

•	Tighten the trailing link bracket bolts to 90 N·m (66 lb ft).