GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 Suspension 🢒 Tires and Wheels 🢒 Wheelhouse Splash Shield Replacement

Removal Procedure

    Notice: Refer to Vehicle Lifting and Jacking Notice in the Preface section.


    Object Number: 1256889 Size: SH
  1. Raise and suitably support the vehicle.
  2. Remove the front wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the front mud guard. Refer to Rear Mud Flap Guard Replacement .
  4. Remove the screws and the front wheel well splash shield.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256889 Size: SH
  1. Install the screws and the front wheel well splash shield.

    2. Tighten
    Tighten the front wheel well splash shield screws to 2 N·m (18 lb in).

  2. Install the front mud guard. Refer to Rear Mud Flap Guard Replacement .
  3. Install the front wheel. Refer to Tire and Wheel Removal and Installation .
  4. Lower the vehicle.