GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 Body Systems 🢒 Lighting 🢒 Repeater Lamp Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256516 Size: SH
  1. Disconnect the negative battery cable.
  2. Slide the side turn signal lamp to the left.
  3. Remove the side turn signal lamp from the fender.
  4. Disconnect the electrical connector.
  5. Twist and remove the bulb from the side turn signal lamp.

Installation Procedure

    Object Number: 1256516 Size: SH
  1. Insert and twist to install the replacement bulb into the side turn signal lamp.
  2. Connect the electrical connector.
  3. Install the side turn signal lamp into the fender.
  4. Connect the negative battery cable.