GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 Body Systems 🢒 Lighting 🢒 Tail Lamp Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256517 Size: SH
  1. Disconnect the negative battery cable.
  2. Disconnect the electrical connectors.
  3. Remove the nuts and the lamp assembly.
  4. Remove any inoperative bulb.

Installation Procedure

    Object Number: 1256517 Size: SH
  1. Install the replacement bulbs.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the lamp assembly with the nuts.

    3. Tighten
    Tighten the rear combination lamp assembly nuts to 2 N·m (18 lb in).

  3. Connect the electrical connectors.
  4. Connect the negative battery cable.