Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the console cover.
- Remove the screws and the ashtray housing.
- Remove the bulb from the ashtray lamp housing.
- Disconnect the bulb from the ashtray lamp housing electrical connector.
Installation Procedure
- Connect the replacement bulb to the ashtray lamp housing electrical connector.
- Install the replacement bulb into the ashtray lamp housing.
Notice: Refer to Fastener Notice in the Preface section.
- Install the ashtray housing with the screws.
Tighten
Tighten the ashtray housing screws to 2.5 N·m (22 lb in).
- Install the console cover.
- Connect the negative battery cable.