Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Driver Information System Schematics Connector End View Reference: Displays and Gages Connector End Views | |||
1 | Did you review the Luggage Compartment Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Body Rear End |
2 | Open the rear compartment. Is the trunk ajar indicator illuminated? | Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections |
3 |
Does the scan tool indicate the TRUNK OPEN SWITCH parameter as OPEN? | Go to Step 9 | Go to Step 4 |
4 |
Is the trunk ajar indicator illuminated? | Go to Step 5 | Go to Step 7 |
5 | Connect a fused jumper between the rear compartment lid ajar switch signal and ground circuits. Is the trunk ajar indicator illuminated? | Go to Step 8 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the rear compartment lid ajar switch. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 12 | Go to Step 11 |
7 | Repair open or high resistance in the signal circuit of the rear compartment lid ajar switch. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 12 | -- |
8 | Repair open or high resistance in the ground circuit of the rear compartment lid ajar switch. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 12 | -- |
9 | Inspect for an open or high resistance in the ajar signal circuit to the instrument cluster. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 12 | -- |
10 | Replace the instrument panel cluster. Refer to Instrument Cluster Replacement (IPC). Did you complete the replacement? | Go to Step 12 | -- |
11 | Replace the rear compartment lid ajar switch. Refer to Rear Compartment Lid Latch Replacement . Did you complete the replacement? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
