GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Epica 🢒 HVAC 🢒 HVAC - Automatic 🢒 Air Inlet Valve Actuator Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256113 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the I/P storage compartment. Refer to Instrument Panel Storage Compartment Replacement.
  3. Remove the actuating rod by snapping the rod out of the lever with needle-nose pliers.
  4. Remove the actuating lever.
  5. Disconnect the electrical connector.

    6. Object Number: 1256114 Size: SH
  6. Remove the motor retaining screws.
  7. Remove the motor.

Installation Procedure

    Object Number: 1256114 Size: SH
  1. Install the motor.
  2. Install the motor retaining bolts and tighten.

    3. Object Number: 1256113 Size: SH
  3. Install the actuating lever.
  4. Install the actuating rod.
  5. Connect the electrical connector.
  6. Remove the I/P storage compartment. Refer to Instrument Panel Storage Compartment Replacement.
  7. Connect the negative battery cable.