GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Epica 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Vehicle Yaw Sensor Replacement

Removal Procedure

    Object Number: 2006091 Size: SH
  1. Turn the ignition to Off.
  2. Remove the center console. Refer to Front Floor Console Replacement .
  3. Disconnect the yaw rate sensor connector (2).
  4. Remove the yaw rate sensor attaching bolts.
  5. Remove the yaw rate sensor (1).

Installation Procedure

    Object Number: 2006091 Size: SH
  1. Install the yaw rate sensor (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the yaw rate sensor attaching bolts.

    3. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  3. Connect the yaw rate sensor connector (2).
  4. Install the center console. Refer to Front Floor Console Replacement .