GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Epica 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Front Brake Rotor Replacement

Removal Procedure

    Notice: Refer to Brake Caliper Notice in the Preface section.


    Object Number: 1255710 Size: SH
  1. Remove the caliper. Refer to Front Brake Caliper Replacement .
  2. Remove the brake shoes.
  3. Remove the caliper mounting bracket.

    4. Object Number: 1255632 Size: SH
  4. Remove the rotor detent screw.
  5. Remove the rotor.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1255632 Size: SH

    Important:  To guarantee uniform braking, always refinish both rotors even if only one rotor is defective.

  1. Install the rotor on the front wheel hub and install the detent screw.

    2. Tighten
    Tighten the rotor detent screw to 4 N·m (35 lb in).


    Object Number: 1255710 Size: SH
  2. Apply a few drops of thread-locking compound to the caliper bracket mounting bolts and install the caliper bracket.

    3. Tighten
    Tighten the caliper bracket mounting bolts to 95 N·m (70 lb ft).

  3. Install the brake shoes and the caliper. Refer to Front Brake Caliper Replacement .