GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Epica 🢒 Transmission/Transaxle 🢒 Manual Transaxle - D24 🢒 Shift Rod Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1255756 Size: SH
  1. Disconnect the negative battery cable.
  2. Separate the plastic clip from the end of each ball socket.

    3. Object Number: 1255757 Size: SH
  3. Separate the ball sockets from the ball studs on the linkage bolts using a pry bar.
  4. Remove the control shift rod from the vehicle.

Installation Procedure

    Object Number: 1255756 Size: SH
  1. Install the control shift rod into the vehicle.
  2. Press the ball sockets onto the ball studs on the linkage bolts.
  3. Connect the plastic clip on the end of each ball socket.
  4. Connect the negative battery cable.