- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle .
- Remove the transaxle drain plug and allow the transaxle to drain completely.
- Remove the fluid level check plug.
Notice: Refer to Fastener Notice in the Preface section.
- Clean and install the transaxle drain plug.
Tighten
Tighten the transaxle drain plug to 6N·m (53 lb in) + 45-180°.
- Add SAE75W90 transaxle fluid until it seeps out of the fluid level check plug.
- Clean and install the fluid level check plug.
Tighten
Tighten the fluid level check plug to 6N·m (53 lb in) + 45-180°.
- Lower the vehicle and verify proper operation.