Tools Required

J 26610 Installer

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement .
4. Remove the dust boot retaining clamps.
5. Remove the dust boot.

1. Install the dust boot.
2. Install the tie rod end dust boot retaining clamp.
3. Install the cylinder end dust boot retaining clamp with the J 26610 .
4. Install the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement .
5. Install the wheel. Refer to Tire and Wheel Removal and Installation .
6. Lower the vehicle.