GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2008
🢒
Epica
🢒
Power and Signal Distribution
🢒
Wiring Systems and Power Management
🢒 Powertrain Component Views
Figure
1:
Ignition Coils, Injectors, and Heated Oxygen Sensor (HO2S) (Bank 1 and 2)
(1)
Fuel Injector 1
(2)
Fuel Injector 2
(3)
Fuel Injector 3
(4)
Fuel Injector 4
(5)
Fuel Injector 5
(6)
Fuel Injector 6
(7)
Ignition Coil
(8)
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
(9)
Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1
(10)
Heated Oxygen Sensor (HO2S) Bank 1 Sensor 2
(11)
Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
Figure
2:
Camshaft Position (CMP), Crankshaft Position (CKP) and Engine Coolant Temperature (ECT) Sensors, EVAP Purge Solenoid Valve
(1)
Camshaft Position (CMP) Sensor and Connector
(2)
Crankshaft Position (CKP) Sensor
(3)
EVAP Canister Purge Solenoid Valve
(4)
Engine Coolant Temperature (ECT) Sensor 2.5L
Figure
3:
Intake Air Temperature (IAT) Sensor, Throttle Body (MTIA) , Exhaust Gas Recirculation (EGR) and Intake Manifold Tuning Valve (IMTV) Solenoid
(1)
Intake Air Temperature (IAT) Sensor
(2)
Main Throttle Idle Actuator (MTIA)
(3)
Exhaust Gas Recirculation (EGR) Valve 2.5L
(4)
Intake Manifold Tuning Valve (IMTV) Solenoid
Figure
4:
Knock Sensors (KS)/ Manifold Absoulte Pressure (MAP) Sensor
(1)
Manifold Absoulte Pressure (MAP) Sensor
(2)
Knock Sensor (KS) and Connector
Figure
5:
Engine Harness 2.5L (1 of 3)
(1)
Battery
(2)
Engine Control Module (ECM)
(3)
Fuse Block - Underhood
Figure
6:
Engine Harness 2.5L (2 of 3)
(1)
Injector 1
(2)
Injector 2
(3)
Injector 3
(4)
Injector 4
(5)
Injector 5
(6)
Injector 6
(7)
Starter Motor
(8)
Knock Sensor - Bank 2
(9)
G106
(10)
G103
(11)
G104
(12)
X106
(13)
Knock Sensor - Bank 1
(14)
X107
(15)
Generator
Figure
7:
Engine Harness 2.5L (3 of 3)
(1)
Electronic Throttle Control (ETC)
(2)
Exhaust Gas Recirculation (EGR) Solenoid Valve
(3)
EVAP Canister Purge Solenoid Valve
(4)
Heated Oxygen Sensor (HO2S) 1 - Bank 2
Figure
8:
Engine Harness 2.0L (1 of 3)
(1)
Diesel Particulate Pressure Sensor
(2)
Glow Plug Control Unit
(3)
Engine Control Module (ECM)
(4)
Exhaust Gas Temperature Sensor
Figure
9:
Engine Harness 2.0L (2 of 3)
(1)
Injector 1
(2)
Injector 2
(3)
Injector 3
(4)
Injector 4
(5)
Exhaust Gas Recirculation Solenoid Valve
(6)
Crankshaft Position Sensor
(7)
Boost Pressure Actuator
Figure
10:
Engine Harness 2.0L (3 of 3)
(1)
Fuel Rail Pressure Sensor
(2)
Boost Pressure Sensor
(3)
Camshaft Position Sensor (CMP)
(4)
Throttle Plate Actuator
(5)
Starter Solenoid
(6)
Fuel Injection Pump
(7)
Generator
(8)
Engine Coolant Temperature (ECT) Sensor