GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Epica 🢒 Roof 🢒 Sunroof 🢒 Sunroof Module Assembly Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256850 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the headliner. Refer to Headlining Trim Panel Replacement .
  3. Remove the drain hoses.

    4. Object Number: 1256851 Size: SH
  4. Disconnect the electrical connectors.
  5. Remove the screws and the motor.

    6. Object Number: 1256852 Size: SH
  6. Remove the motor control module.
  7. Remove the bolts and the housing from the vehicle.

    8. Object Number: 1256853 Size: SH
  8. Remove the rubber end caps.
  9. Remove the drain nozzles.
  10. Remove the shade stops.
  11. Remove the glass stops.

    12. Object Number: 1256855 Size: SH
  12. Remove the shade.
  13. Remove the glass and the frame from the housing.
  14. Remove the plastic trim.
  15. Remove the screws and the glass from the frame.

Installation Procedure

    Object Number: 1256855 Size: SH
  1. Install the glass to the frame with the screws.

    2. Object Number: 1256853 Size: SH
  2. Install the plastic trim.
  3. Install the glass and the frame to the housing.
  4. Install the shade.
  5. Install the glass stops.
  6. Install the shade stops.
  7. Install the drain nozzles.
  8. Install the rubber end caps.

    9. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256852 Size: SH
  9. Install the housing to the roof of the vehicle with the bolts.

    10. Tighten
    Tighten the sunroof housing bolts to 10 N·m (89 lb in).


    Object Number: 1256851 Size: SH
  10. Install the motor control module.
  11. Install the motor with the screws.

    12. Tighten
    Tighten the sunroof motor screws to 3 N·m (27 lb in).

  12. Connect the electrical connectors.

    13. Object Number: 1256850 Size: SH
  13. Install the drain hoses
  14. Install the headliner. Refer to Headlining Trim Panel Replacement .
  15. Connect the negative battery cable.
  16. Calibrate the power sunroof, if necessary. Refer to Power Sunroof Calibration .