Removal Procedure
- Remove the front bucket seat from vehicle. Refer to
Front Seat Replacement - Bucket
.
- Remove the screws and slide the back panel down to remove it.
- Remove the each seat trim.
- Disconnect the electrical connectors.
- Remove the bolts and the seat back.
Installation Procedure
- Install the seat back onto the seat cushion.
Notice: Refer to Fastener Notice in the Preface section.
- Install the front seat back bolts.
Tighten
Tighten the front seat back bolts to 45 N·m (33 lb ft).
- Connect the electrical connectors.
- Install the seat trims to its original position.
- Install the back panel onto the seat with the screws.
Tighten
Tighten the front seat cover screws to 12 N·m (106 lb in).
- Install the front bucket seat in the vehicle. Refer to
Front Seat Replacement - Bucket
.