GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Epica 🢒 Safety and Security 🢒 Theft Deterrent 🢒 Hood Ajar Indicator Switch Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1256919 Size: SH
  1. Disconnect the negative battery cable.
  2. Reach underneath the hood ajar switch and hold the mounting nut while removing the hood ajar mounting bolt.
  3. After the mounting bolt and nut are removed, push the hood ajar switch upward from below.
  4. Disconnect the electrical connector from the hood ajar switch.
  5. Remove the hood ajar switch.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1256919 Size: SH
  1. Install the hood ajar switch with the mounting bolt and nut.

    2. Tighten
    Tighten the hood ajar switch mounting bolt to 4 N·m (35 lb in).

  2. Connect the electrical connector to the hood ajar switch.
  3. Connect the negative battery cable.