Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable
- Pry off the interior courtesy lamp lens.
- Remove the screws and the switch.
- Disconnect the electrical connector.
Installation Procedure
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunroof control switch with the screws.
Tighten
Tighten the power sunroof control switch screws
to 2 N·m (18 lb in).
- Install the interior courtesy lamp lens.
- Connect the negative battery cable.