GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Epica 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Replacement

Removal Procedure

    Object Number: 1255628 Size: SH
  1. Remove the crossmember.
  2. Remove the stabilizer link.
  3. Remove the stabilizer bar bolts and nuts.
  4. Remove the U-clamp and bushing.

Installation Procedure

    Object Number: 1255630 Size: SH
  1. Install the U-clamp and bushing with stabilizer bar.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer bar bolts and nuts.

    3. Tighten
    Tighten the stabilizer bar bolts and nuts to 50 N·m (37 lb ft).

  3. Install the stabilizer link and crossmember.