Rear Axle Upper Control Arm Replacement for Chevrolet Epica 2009

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the rear wheels.
3. Remove the upper arm nut-to-rear knuckle.



4. Remove the nuts upper arm-to-body.
5. Remove the upper arm.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the upper arm with nuts-to-body and tighten to 60 N·m (44 lb ft).
2. Install the upper arm nut-to-rear knuckle and tighten to 110 N·m (81 lb ft).