For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2009 🢒 Epica 🢒 Suspension 🢒 Rear Suspension 🢒 Trailing Arm Replacement

Trailing Arm Replacement for Chevrolet Epica 2009

Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the rear wheels.
Remove the trailing link bolt-to-knuckle and the trailing link bracket bolts.
Remove the trailing link.

Caution: Refer to Fastener Caution in the Preface section.

Install the trailing link with bolt-to-knuckle and the bolts-to-trailing link bracket.

•	Tighten the trailing link bolt-to-knuckle to 120 N·m (89 lb ft).

•	Tighten the trailing link bracket bolts to 90 N·m (66 lb ft).