GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Epica 🢒 Body Systems 🢒 Lighting 🢒 Door Lamp Replacement

Removal Procedure

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    Object Number: 1256530 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the front door step lamp lens cover.
  3. Reposition the lower half of the front door trim panel.
  4. Remove the front door step lamp.
  5. Disconnect the electrical connector.

Installation Procedure

    Object Number: 1256530 Size: SH
  1. Connect the electrical connector.
  2. Install the replacement front door step lamp bulb.
  3. Install the lower half of the door trim panel to its original position.
  4. Install the front door step lamp lens cover.
  5. Connect the negative battery cable.