For 1990-2009 cars only
Removal Procedure
- Remove the center trim bezel. Refer to Instrument Cluster Trim Panel Replacement.
- Remove the screws holding the shift indicator to the center console trim bezel and disconnect the electrical connector.
- Remove the shift indicator from the center trim bezel.
Installation Procedure
- Align the shift indicator with the center trim bezel and fasten with the screws and tighten to 2 N·m (18 lb in).
- Connect the electrical connection to the center trim bezel.
- Install the center trim bezel. Refer to Instrument Cluster Trim Panel Replacement.
Caution: Refer to Fastener Caution in the Preface section.
