GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Epica 🢒 Transmission 🢒 Automatic Transmission - Aisin 55-51LE 🢒 Transmission Rear Mount Bracket Replacement

Removal Procedure

    Object Number: 1398176 Size: SH
  1. Remove the rear transmission mount. Refer to Transmission Rear Mount Replacement.

    2. Object Number: 927947 Size: SH
  2. Disconnect the intermediate steering shaft from the steering gear.

    3. Object Number: 927957 Size: SH
  3. Remove the steering gear to frame bolts.
  4. Secure the steering gear upward in order to gain additional clearance.

    5. Object Number: 1398182 Size: SH
  5. Remove the transmission mount bracket to transmission bolts.

    6. Object Number: 1398184 Size: SH
  6. Remove the transmission mount bracket from the vehicle.

Installation Procedure

    Object Number: 1398184 Size: SH
  1. Position the transmission mount bracket to the transmission.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1398182 Size: SH
  2. Install the transmission mount bracket to transmission bolts and tighten to 110 N·m (81 lb ft).

    3. Object Number: 927957 Size: SH
  3. Lower the steering gear to the frame.
  4. Install the steering gear to frame bolts and tighten to 110 N·m (81 lb ft).

    5. Object Number: 927947 Size: SH
  5. Install the intermediate steering shaft to the steering gear.
  6. Install the intermediate steering shaft to gear pinch bolt and tighten to 34 N·m (25 lb ft)

    7. Object Number: 1398176 Size: SH
  7. Install the rear transmission mount. Refer to Transmission Rear Mount Replacement.