Rocker Panel Molding Replacement Production Molding

1. Remove the front mud guards. Refer to Rear Mud Flap Guard Replacement.
2. Remove the screws and the rocker panel molding.

1. Install the rocker panel molding with the screws.
2. Instal the front mud guards. Refer to Rear Mud Flap Guard Replacement.

Rocker Panel Molding Replacement Accessory Molding

1. Remove the lower rocker molding clips.



2. Remove the rocker molding end clips.



3. Remove the screws.



4. Remove the rocker molding.

1. Install the rocker panel molding.



2. Install the rocker molding end clips.



3. Install the rocker molding lower clips.

Caution: Refer to Fastener Caution in the Preface section.




4. Install the rocker panel molding screws and tighten to 2 N·m (18 lb in).