Hood Primary Latch Release Cable Replacement for Chevrolet Epica 2009

1. Remove the hood release handle screw.
2. Remove the knee bolster and the hood release handle.
3. Remove the cable from the hood release handle.
4. Remove the hood secondary latch. Refer to Hood Primary and Secondary Latch Replacement.
5. Remove the cable from the engine compartment.

1. Install the cable through the engine compartment.
2. Install the hood secondary latch. Refer to Hood Primary and Secondary Latch Replacement.
3. Install the cable to the hood release handle.

Caution: Refer to Fastener Caution in the Preface section.

4. Install the hood release handle and the knee bolster with the screw and tighten to 2.5 N·m (22 lb in).