GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Epica 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Front Bumper Fascia Extension Replacement

Removal Procedure

    Object Number: 2002207 Size: SH
  1. Remove the front molding (1) bonded by the two sided tape.

    2. Object Number: 2002208 Size: SH
  2. Remove the front lower fascia extension screws.

    3. Object Number: 2002209 Size: SH
  3. Remove the side lower screws from the front lower fascia extension.

    4. Object Number: 2002211 Size: SH
  4. Remove the side screws and the retaining clips from the front lower fascia extension.

    5. Object Number: 2002212 Size: SH
  5. Remove the nuts from the front lower fascia extension.

    6. Object Number: 2002213 Size: SH
  6. Remove the front lower fascia extension from the vehicle.

Installation Procedure

    Object Number: 2002213 Size: SH
  1. Install the front lower fascia extension.

    2. Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 2002212 Size: SH
  2. Install the front lower fascia extension nuts and tighten to 2 N·m (18 lb in).

    3. Object Number: 2002211 Size: SH
  3. Install the side screws and the lower retaining clips. Tighten the side screws to 2 N·m (18 lb in).

    4. Object Number: 2002209 Size: SH
  4. Install the lower fascia extension lower screws and tighten to 2 N·m (18 lb in).

    5. Object Number: 2002208 Size: SH
  5. Install the lower fascia extension screws and tighten to 2 N·m (18 lb in).

    6. Object Number: 2002207 Size: SH
  6. Apply new 2-way tape and install the front lower fascia extension molding (1).