GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Epica 🢒 Steering 🢒 Power Steering 🢒 Power Steering Fluid Reservoir Replacement

Removal Procedure

    Object Number: 1860617 Size: SH
  1. Siphon the power steering fluid from the fluid reservoir.
  2. Remove the nuts from the cooling system surge tank.
  3. Push the surge tank toward the engine.

    4. Caution: Refer to Power Steering Hose Disconnected Caution in the Preface section.

  4. Loosen the hose clamps and remove both hoses from the fluid reservoir.
  5. Remove the bolts from the fluid reservoir.
  6. Remove the reservoir.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1860617 Size: SH
  1. Install the power steering fluid reservoir with the bolts and tighten to 7.5 N·m (66 lb in).

    2. Caution: Refer to Installing Hoses without Twists or Bends Caution in the Preface section.

  2. Connect both hoses to the fluid reservoir and secure the hose clamps.
  3. Install the surge tank with the nuts and tighten to 5 N·m (44 lb in).

    4. Caution: Refer to Using Proper Power Steering Fluid Caution in the Preface section.

  4. Fill the fluid reservoir with power steering fluid. Refer to Checking and Adding Power Steering Fluid.

    5. Caution: Refer to Air in the Power Steering System Caution in the Preface section.

  5. Bleed the system. Refer to Power Steering System Bleeding.
  6. Inspect for leaks. If there are leaks, correct the cause of the leaks. Refer to Power Steering Fluid Leaks.