Seat Back Cushion Side Bolster Panel Replacement for Chevrolet Epica 2009

1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement.
2. Remove the bolt that secures the rear seat side bolster cushion.
3. Lift and remove the rear seat side bolster cushion.

1. Slide the rear seat side bolster cushion into the retaining brackets.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the rear seat side bolster cushion with the bolt and tighten to 25 N·m (18 lb ft).
3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement.