GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Epica 🢒 Preface 🢒 Dangers, Warnings, and Cautions 🢒 Rear Wheel Bearing and Hub Replacement

Removal Procedure

    Object Number: 1255677 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the rear wheels.
  3. Remove the rear brake caliper and remove the rear disc brake and screw.

    4. Object Number: 1255684 Size: SH
  4. Remove the rear hub nuts-to-knuckle and the rear hub.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1255684 Size: SH
  1. Install the rear hub nuts-to-knuckle and tighten to 65 N·m (48 lb ft).
  2. Install the rear disc brake and the rear brake caliper and tighten to 45 N·m (33 lb ft).
  3. Install the rear brake disc screw and tighten to 4 N·m (35 lb in).