GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Suspension 🢒 Rear Suspension 🢒 Trailing Arm Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 930291 Size: SH
  2. Remove the trailing arm bracket to body bolts.
  3. Remove the trailing arm bushing to bracket nut and bolt.

    4. Object Number: 930316 Size: SH
  4. Remove the park brake cable clip from the trailing arm.

    5. Object Number: 929573 Size: SH
  5. Remove the trailing arm to knuckle bolts.
  6. Remove the trailing arm.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 929573 Size: SH
  1. Install the trailing arm to the knuckle.

    2. Tighten
    Tighten the bolts to 110 N·m (81 lb ft).

  2. Position the trailing arm bracket to the trailing arm.
  3. Loosely install the trailing arm bushing to bracket nut and bolt.

    4. Object Number: 930291 Size: SH
  4. Push upward on the trailing arm and loosely install the front bolt.
  5. Use a drift to align the remaining bolts.

    6. Tighten
    Tighten the trailing arm bracket to body bolts to 110 N·m (81 lb ft).

  6. Tighten the trailing arm bushing to bracket nut and bolt.

    7. Tighten
    Tighten the bolt to 160 N·m (118 lb ft).


    Object Number: 930316 Size: SH
  7. Install the park brake cable clip.

    8. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).

  8. Lower the vehicle.