GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Body Rear End 🢒 Rear Spoiler Replacement

Removal Procedure

    Object Number: 1360921 Size: SH
  1. Open the liftgate.
  2. Remove the liftgate upper interior trim panel to expose the center bolt.
  3. Remove the spoiler to liftgate bolts (3).
  4. Disconnect the stop lamp harness (2).
  5. Disconnect the rear washer hose.
  6. Lift the spoiler to disengage the locating retainers and remove the spoiler from the liftgate.

Installation Procedure

    Object Number: 1360921 Size: SH
  1. Position the spoiler loosely over the liftgate.
  2. Connect the rear washer hose.
  3. Connect the stop lamp harness (2).
  4. Push down the spoiler to the liftgate to secure the locating tab retainers.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the spoiler to liftgate bolts.

    6. Tighten
    Tighten the bolts to 2 N·m (18 lb in).

  6. Install the liftgate upper interior trim panel.
  7. Close the liftgate.