GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
  3. Disconnect the electrical connector from the front door window regulator motor.

  4. Object Number: 1383043  Size: SH
  5. Remove the window from the regulator.
  6. 4.1. Raise the window.
    4.2. Tape the window into position.
  7. Remove the front door window regulator motor screws.

Installation Procedure


    Object Number: 1383043  Size: SH
  1. Align the front door window regulator motor assembly to the front door window regulator.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the front door window regulator motor to regulator screws.
  4. Tighten
    Tighten the front door window regulator motor to door screws to 8 N·m (71 lb in).

  5. Connect the electrical connector to the front door window regulator motor.
  6. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  7. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .