GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Doors 🢒 Rear Side Door Window Regulator Motor Replacement

Removal Procedure
  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Disconnect the electrical connector from the rear door window regulator motor.

    4. Object Number: 1383043 Size: SH
  4. Remove the rear door window regulator motor to regulator screws.
  5. Remove the rear door window regulator motor assembly.

Installation Procedure

    Object Number: 1383043 Size: SH
  1. Align the rear door window regulator motor assembly to the rear door window regulator.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the rear door window regulator motor to regulator screws.

    3. Tighten
    Tighten the rear door window regulator motor to regulator screws to 8 N·m (71 lb in).

  3. Connect the electrical connector to the rear door window regulator motor.
  4. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  5. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .