GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Lighting Systems 🢒 Fog Lamp Switch Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) trim bezel from the center stack. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages and Console.

    2. Object Number: 1344255 Size: SH
  2. Remove the screw that retains the center air deflector assembly to the I/P trim bezel. Remove the air deflector assembly.

    3. Object Number: 1344250 Size: SH
  3. Use a flat-bladed tool to release the fasteners on the fog lamp switch.

    4. Object Number: 1246237 Size: SH
  4. Disconnect the electrical connector and remove the fog lamp switch.

Installation Procedure

    Object Number: 1344250 Size: SH
  1. Align the fog lamp switch with the center air deflector assembly and snap into place.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1344255 Size: SH
  2. Install the center air deflector assembly to the I/P trim bezel.

    3. Tighten
    Tighten the screw to 2.5 N·m (22 lb in).


    Object Number: 1246237 Size: SH
  3. Connect the electrical connector to the fog lamp switch.
  4. Install the I/P trim bezel. Refer to Instrument Panel Accessory Bezel Replacement in Instrument Panel, Gages, and Console.
  5. Test the fog lamp switch for proper operation.