GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Equinox 🢒 Body 🢒 Lighting Systems 🢒 Rear License Plate Lamp Bulb Replacement

Removal Procedure

    Object Number: 1373393 Size: SH
  1. Remove the screws (2) attaching the rear license plate lamp assembly to the rear license plate lamp bezel.
  2. Lower the license plate lamp assembly (1) from the bezel.
  3. Rotate the license plate lamp bulb assembly counterclockwise and remove it from the housing.
  4. Pull the license plate lamp bulb out of the bulb socket.

Installation Procedure

    Object Number: 1373393 Size: SH
  1. Press the license plate lamp bulb into the lamp socket until seated.
  2. Install the license plate lamp bulb socket assembly (1) in the license plate lamp lens and rotate clockwise until seated.
  3. Align license plate lamp assembly with the license plate lamp bezel.

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the license plate lamp assembly to license plate lamp bezel screws (2).

    5. Tighten
    Tighten the screws (2) to 4 N·m (35 lb in).